Download MP Driver for Canon PIXMA MG4140, MG4150 printers

Printer

Congratulations! You can start downloading the MP Driver for Canon PIXMA MG4140, MG4150 printers ver. 1.02 for Canon PIXMA MG4140 Printer. To start download file, click green «download» button on page below. We advise you to use a variety of download managers like "FlashGet" or "Download Master". Also, you can go back to the list of drivers and choose a different driver for Canon PIXMA MG4140 Printer.

  Drivers  >  Printers  >  Canon  >  PIXMA MG4140  >  MP Driver for Canon PIXMA MG4140, MG4150 printers ver. 1.02

To start the download, select one of the servers and click "download"

RARMP Driver for Canon PIXMA MG4140, MG4150 printers
28.7 Mb
Version, Date:
1.02, 12.10.2012
Operation Systems:
Windows 8.1 x64, Windows 8.1 x32, Windows 8 x64, Windows 8 x32, Windows 7 x64, Windows 7 x32, Windows Vista x64, Windows Vista x32, Windows XP x32
Description:
This file is a driver for Canon IJ multifunction printers.
IJ Network Tool is included in this MP Drivers.
Multilangual version.
Notation:
Precaution:
Printer Driver:
1. With Internet Explorer 11, a web site containing Japanese may not be printed properly. In Windows Update, update the OS and Internet Explorer to the latest version.

2. If the printer driver is installed in Windows 8, and if Windows 8 is upgraded to Windows 8.1 while keeping the printer driver installed, Enable bidirectional support in the printer properties may be deselected, disabling detection of the ink level, etc. Re-install the printer driver after upgrading to Windows 8.1 and Enable bidirectional support is selected.

Scanner Driver:
1. If the scanner driver is installed in Windows 8, and if Windows 8 is upgraded to Windows 8.1 while keeping the scanner driver installed, scanning from the product (by using the SCAN button) may not be available. Re-install the scanner driver after upgrading to Windows 8.1.

IJ LAN Driver and Tool:
1. In the environment where the Firewall software operates, as the printer detection using LAN communication is inhibited, the setup may not be competed.

Preventive action:
Disable the Firewall setting temporarily, or close the Firewall software, then, perform the setup. In each case, disconnect the network from the Internet first.

2. When using of IJ Network Tool under Windows Vista 64bit version, the following message may be displayed at the setup:New Port could not be created.

Preventive action:
Cancel the setup once, then retry the setup after restarting the computer.
Supported Devices:
infoCanon MG4100 series
infoCanon MG4100 series Printer
Hardware IDs:
infoCanonMG4100_series
infoCanonMG4100_series6E3B
infoUSBPRINT\CanonMG4100_series6E3B
infoUSB\VID_04A9&PID_1753&MI_00
infoWSDPRINT\CanonMG4100_series6E3B
Other drivers: